特點 Features:

1.結構緊湊,占用空間小,可以三維改變輸送方向。

2.輸送物料封閉在管路中輸送。避免物料受外界環境污染。

3.物料輸送時沒有壓力，出口不必設置除塵器。

4.物料沿著管道平滑輸送，物料破損少。

5.物科靠刮板向前低速推進，避免了氣力輸送過程中出現的混合料分離現象。

6.特別適合于使用單一原料的塑料擠出機供料，可設置多個進、出料口。

7.多余的原料通過環形管路返回，不需要在輸送末端加裝回料斗。

8.能耗最低--運行成本最經濟，整套系統只有一個電機來帶動。

1.Compact structureand small space occupation able to change the direction of transportaton in three dimensions.

2.Materials conveyed are sealed in the pipeline to avold environmertal pollution.

3.No pressure when corvering materials, so there is no need to set dust ollector at the outiet.

4.The material is transported along the pipeline smoothly with little damage.

5 The material is pushed forward at low speed by armored face to avoid the separaticnof mixture in the process of pneumatic conveying.

6.It is especially suitable for the feeding of plastic extruder with single raw material, and multiple inlet and outlet ports can be set.

7.Excessive raw materials are returned through the loop pipeline, no need to install a return hopper at the end of the conveying.

B.The lowest energy consumption--tne most economical operation cost. Only one motor to drive the whole system

通用配置 Suitable Configuration:

1.材質:

a.殼體、管路與物料按觸部份SS304;

b.鏈條: SS3D4;

c.鏈板:尼龍;

2.配齒輪減速機，功率接實際工況定; .

3.聯軸器傳動;

4.進、出料口可接用戶要求制作;

5. NSK軸承、TTO油封;

6.出料口上有鉸接的觀察蓋，方便觀察物料輸送情況。

1. Material: 

a. shell,pipeline and parts contacting material SS304;

b. chains:SS304

c. chain plate: nylon;

2. Equipped with gear reducer and its powe is subject to the actual working condition:

3. Coupling drive;

4. The inlel and outlel ports can be customized;

5. NSK bearings, TTO oil seal;

6. A hinged observation cover set on the outlet port to facilitate the observalion of material transportation.